ITEM
|
SPECIFICATIONS
|
Appearance:
|
White Crystal powder
|
Assay:
|
98 % (MIN.) |
Melting Point:
|
110~125ºC MIN |
Ash Content:
|
0.1% WT MAX
|
Volatile:
|
0.5% WT MAX
|
percent transmission of solution:
|
|
425 NM
500 NM
|
98% MIN.
99% MIN.
|
Applications:
Antioxidant YD-1010 finds application in plastics, rubber, latex, varnishes, adhesives, TPR's and Hot Melts. In plastics, antioxidant YD-1010 provides excellent antioxidant performance in Polyethylene, Polystyrene, Polyacetal, PVC, AS resin, Methacrylic resin, Polycarbonate, Polyester, and Polymethyl-pentene as well as many others. In rubbers, Antioxidant YD-1010 can be used in SBR, EPR, EPDM, Polybutadiene, Neoprene, Nitrile, Polyisoprene, and many other synthetic rubbers. Typical dosage is 0.02% - 0.50% by weight.
Advantages:
Highly compatible with a wide range of organic substrates
Non-staining and non-discoloring
Excellent resistance to extraction
Odorless and tasteless
Improvement of long-term stability
Low volatility
Ease of compatibility with other stabilizers
Loading Instructions:
The loading data and results are based on laboratory work (and field testing) under controlled conditions and do not necessarily indicate the result that the buyer or user will attain. For this reason we strongly recommend testing of your own system under the actual conditions of processing and end-use prior to full scale testing. The recommended loading concentrations in polyolefins range between 0.05% and 0.5%
depending on substrate, processing conditions, and long-term stability requirements. Concentration levels of Antioxidant1010 in hot melt adhesives range from 0.2% to 1%, and in synthetic tackifier resins, Antioxidant 1010 concentrations range between 0.1% and 0.5%.
Exact loading must be determined by compositions of the specific polymer system.
Packing:The net weight is 20 or 25Kg.It is packed in Three-in-one compound bags.The inner layer is plastic film,and the outer is polypropylene braided lining kraft paper bag